WDX series [Separate type]

Our unique "Dyna-Shock Modulation (DM)" method by full digital technology enables full-range cleaning, from gentle to powerful, and provides the optimum cleaning effect for each application.

The DM (DYNASHOCK MODULATION) is an oscillation method to obtain optimal cleaning effect for both gentle and powerful cleaning by controlling the ratio (modulation) of ultrasonic power generated simultaneously by two frequencies from the same transducer while the total output power remains constant.

By adjusting the ultrasonic power ratio between a low-frequency component suitable for powerful cleaning and a high-frequency component suitable for precision cleaning with low damage, optimal cleaning effects can be obtained according to the cleaning purpose, from powerful cleaning to precision cleaning.

In the WDX series, the ultrasonic power ratio of the two frequencies is called DM modulation. When the ultrasonic power of the low-frequency component is PL and the ultrasonic power of the high-frequency component is PH, it is defined as DM modulation degree = PL÷PH.

■Comparison of DM modulation and aluminum foil erosion
　(Irradiated at constant ultrasonic output of 600W)

◆Dyna-shock modulation (DM) method reduces cleaning irregularities and damage, and allows selection of cleaning power according to the application, from precision cleaning to hard cleaning of metal processed parts, etc.
◆The selection of DM modulation generates uniform ultrasonic waves with high sound pressure throughout the entire tank. This allows for even and uniform cleaning.

◆Digital control system realizes various functions.
・Realization of optimal cleaning
Stable ultrasonic cleaning is realized by optimal frequency control and ultrasonic output control.
・Improved maintainability
Auto-tuning function eliminates the need to adjust the generator when replacing the transducer unit.
・Wide range of power supply input
Supports power input of 200 VAC to 240 VAC ±10%.
・Monitoring function
Output power can be monitored at the front panel display.
・Error diagnosis function
When an abnormality occurs, an error message indicating the cause of the abnormality is displayed for quick corrective action.
・Sweep function
By adding a sweep function to the DM system, more uniform ultrasonic cleaning is possible.

Metal and Machined Parts Cleaning Precision Machined Parts Cleaning
Printed circuit board cleaning Solar cell parts cleaning
Cleaning of HDD parts cleaning Cleaning of LCD parts cleaning Cleaning of Optical parts cleaning
Semiconductor parts cleaning Food utensils and medical equipment cleaning

[Example of combination]

●I/O interface
Remote function: Ultrasonic oscillation ON/OFF (contact input)
Output function: Alarm output in case of abnormality (relay contact output: open in case of abnormality)
●Output variable range: 0 to 100%.
●Display function: Output power (W), DM modulation (%), error messages
●Ambient operating environment: temperature: 5 to 40°C, humidity: 5 to 80% (with no condensation)
●Power cable length: 3.5 m
●Optional accessory: crystal oscillator terminal block

*Transducer unit can be manufactured with custom specifications, sch as decompression, upon request.

●Liquid temperature range: 5 to 80°C
●Transducer: Bolt-clamped Langevin type transducer
●Transducer cable length: 2.5m (blade part 2m) + output cord 3.5m

●Liquid temperature range: 5 to 100°C
●Transducer: Bolt-clamped Langevin type transducer
●Transducer cable length: 3.5m + output cord 3.5m

■Accessories: Lid
●Liquid temperature range: 5 to 100°C
●Transducer: Bolt-clamped Langevin type transducer
●Transducer cable length: 3.5 m
●Optional accessory: Cleaning basket (KG10F, KG11T)

■Accessories: Lid
●Liquid temperature range: 5 to 100°C
●Transducer: Bolt-clamped Langevin type transducer
●Transducer cable length: 3.5 m
●Optional accessory: Cleaning basket (KG10F, KG11T)
*Heater is for water heating only. Please refrain from using it with anything other than water.
*A separate power supply is required to drive the heater.