Ultrasonic line flow cleaner [HF type]
%20.jpg)
Nozzle type cleaner pulse jet line type
This is a line-type nozzle type ultrasonic cleaner that removes particles by superimposing ultrasonic waves on a curtain-like stream of cleaning solution, mainly for cleaning LCD glass. Like the point type cleaners, this method is also characterized by no reattaching of particles and a high submicron particle removal rate.
Lineup
W-357LM-80
Compatible with LCD glass up to 80 mm wide
Adjustable output power from 10 to 110W
W-357LM-180
Compatible with LCD glass up to 180 mm wide
Almost no metallic ions are generated due to the use of PP (polypropylene) in the nozzle part
Output power can be adjusted from 20 to 220W
W-357LM-380
Compatible with LCD glass up to 380 mm wide
Almost no metallic ions are generated due to the use of PP (polypropylene) in the nozzle part
Output power can be adjusted from 30 to 330W
W-357LM-580
Compatible with LCD glass up to 580mm wide
Almost no metallic ions are generated due to the use of PP (polypropylene) in the nozzle part
Output power can be adjusted from 40 to 440W
Specifications
Generator
| Model | W-357LM-80 | W-357LM-180 | W-357LM-380 | W-357LM-580 | |
| Oscillation mode | Single Frequency Oscillation | ||||
| Rated output | 110W | 220W | 330W | 440W | |
| Output variable range | 10～110W | 20～220W | 30～330W | 40～440W | |
| Nominal oscillation frequency | 1MHz | ||||
| Power input |
AC200～240V |
AC200～240V Single phase 50/60Hz 600VA |
AC200～240V Single phase 50/60Hz 750VA |
AC200～240V Single phase 50/60Hz 900VA |
|
| Interface | Analog output |
4-20mA current output |
|||
| Contact output |
3 points Alarm output, oscillation detection output, power ON output |
||||
| External drive input | 2 points Sensor input, Remote input | ||||
| RS485 communication |
MODBUS® protocol, RTU mode *1 |
||||
| External Dimensions (Includes rubber feet) WxDxHmm |
220×360×143 | ||||
| Weight | 5kg | ||||
●Ambient operating environment: Temperature: 5 to 40°C, humidity: 5 to 80% (no condensation)
●Power cable length: 3m
*1 MODBUS is a registered trademark of Schneider Electric USA Inc.
Generator nozzles
| Generator Model No. | W-357LM-80 | W-357LM-180 | W-357LM-380 | W-357LM-580 | |
| Flow rate | 8L/min | 18L/min | 30L/min | 45~60L/min | |
|
External Dimensions |
113×85×40 | 282×182×105 | 482×182×105 | 682×182×105 | |
| Outlet dimensions | 95×2 | 194×2 | 400×2 | 600×2 | |
| Effective cleaning range | 80×2 | 180×2 | 380×2 | 580×2 | |
| Weight | 2kg | 2.7kg | 4.5kg | 6kg | |
| Material properties |
Nozzle: SUS304 |
Nozzle: PP (polypropylene) |
|||
| Inlet | 15A (1/2B) elbow | Applicable tube (inner diameter φ11, outer diameter φ13) | |||
●Operating temperature range: 20 to 40°C
●Transducer: PZT
●Cable length: Output cord 5m
