HUS-10 [Built-in model Sonic Monitor]

HUS-10_Web

【Launching in May 2025】

Overview

・Quick reading with intensity (mV) and frequency (kHz) on a display
Visible deviation trend from reference value by voltage turbulence

・Monitored and read measurement with RS-485 interface (MODBUS® protocol, RTU mode)

・Supports easy daily maintenance with alarm function

Applications

・For adjustment, inspection and quality control of ultrasonic cleaners manufacturers
・For laboratory experiments

sensor

A sensor is immersed in liquid of a tank or touched in fluid so that acoustic intensity is indicated in mV.
(The displayed value is a relative value.)

* This instrument cannot be calibrated
Instrument inspecting acoustic intensity.
Shows acoustic intensity with relative value, not absolute value.
There might be a variation in measurement depending on its environment or individual differences of instrument itself.
Sign of deterioration can be verified by monitoring acoustic intensity under an identical condition.

 

Specifications

Unit
Model No. HUS-10
Frequency characteristics 10kHz～5MHz
Power source DC24V
Signal input designated probe 1pc
Indicated value detected voltage (mV) / Frequency (kHz)
Maximum measured voltage 300mV
Output  4 to 20 mA
current output

1 point
Resolution 12bit
(maximum allowable load resistance 600Ω)
Digital output 

Open-collector output (MAX35V/0.1A) 2 points
Voltage comparison / Frequency comparison
 Interface

RS485 (MODBUS® protocol, RTU mode)
Up to 32 converters can be concatenated
(Address setting: 1 to 32)
Baud rate: 9600,19200,38400,57600bps
Dimensions (W x D x H mm) 96×90×48 (Protruding parts not included)
Weight 180g
Operating temperature range: 5 to 40°C

Sensor

Model No. HUSS01-S
Shape Straight
Material SUS316L
・Liquid temperature range: 0 to 70°C
・Cable length: 1.5 m

* MODBUS is the registered trademark of Schneider Electric USA, Inc.

PAGE TOP